The good news is that we can usually fix this with a minimum of fuss. Sometimes, it’s simply a matter of a technician removing goop and debris from the hinges and applying a little bit of lubricating oil. At other times, the problem is that the speed setting on the opener needs to be adjusted.
Didn’t know garage doors openers have a speed sensor? Well they do, and frequently, as the garage door opener gets older, it stops working so efficiently One item of interest is that most manufacturer’s of garage door openers, by default, set their garage door openers to medium or even a low setting. ( It probably says so, buried within the instruction book you lost years ago after installing it, which you probably didn’t read.)
How Slow Is Too Slow?
Unlike commercial garage doors openers which, for security reasons are often designed more quickly, but may cost 10-15 times as much, home garage doors are designed to go at a reasonable speed. We suggest timing it by hitting the close switch on your transponder, and then looking at the second had of your watch.
If it takes between 12 and 15 seconds, then you are in good shape. However, if it takes longer, it’s best to call a pro such as Star Solutions Garage Door. What will the technician do? Not only will the technician set your opener to a higher speed, but also will carefully inspect the springs, hinges and tracks to be sure there are no problems, and then carefully lubricate them.
What Is The Technician Adjusts The Speed And It’s Still Slow?
If, after inspecting the unit, inspecting the tracks, springs, and hinges for defects, and lubricating them, it’s still incredibly slow, you may need a garage doors springs replacement system. But frequently, its simply a matter of ensuring everything is in order with the tracks, the system is lubricated, and the garage door repair is on a higher setting.
Call the pro technicians at Star Solutions Garage Door. A service call is very reasonable, and its worth your knowing whether a pro can fix it or it’s time for a new system.
The Most Common Garage Door Problems
There are many problems a homeowner can experience with their garage door opener. Some are simple fixes. other require a pro. Here are the most common:
Garage doors openers work in conjunction with two photo eyes on opposite sides of the garage. These photo eyes connect with each other, usually by infrared light, and while they do nothing to stop a garage door from opening, they are important safety measures when the garage door closes. If the beam of infrared light in interrupted, then, by design, the garage door won’t close.
So why won’t your garage door close? it may be as simple as a box or a bicycle is blocking the path of the infrared connection. It could be that a photosensor has actually gone bad or is flickering, it could be because of George, your St.Bernard who got grease on his tail and use the photosensor to wipe the grease off of, or it could be that your teenage driver actually hit and therefore misaligned the sensor while parking in the garage. Regardless, until the photo-eye system is working properly, your out of business.
A not infrequent problem is that the garage door opener will not work because there is no power to the system. Prior to calling an electrician, you might test the other electric connections in the garage,l and you can also plug in a drill or another piece of electric equipment to see if it’s simply the outlet, in which case you can temporarily get by plugging your garage door opener into that outlet, but anything more than a fuse or unplugged unit, call an electrician.
If you push your remote transmitter and nothing happens, the next step is to go to your transmission receiver within your garage and push the manual button on your receiver. If the garage door opens, then the problem is within your remote, not the system as a whole. Chances are your batteries are dead or dying, and they are not making a good connection with the receiver. If the receiver itself will not even open the garage door manually, they you need to call in a professional.
If your garage door won’t open but you hear the motor running on the garage door opener, there is a good chance that one or more torsion spring or extension springs broken. By no means should you try to fix it yourself as broken springs can cause serious injury. Get a professional technician as soon as possible to fix the problem.
If there is one thing that is more dangerous than broken springs, it is snapped cables. In fact, if you know you have a garage door broken springs, avoid using your garage door altogether until the technician arrives. The reason is the only thing holding the door in place is the cables, which actually move the door up and down.
If a cable becomes snapped, the full weight of your garage door will come crashing down and causing tremendous damage. And hopefully, there are no valuables, pets, or children around. Again, whether you have a broken spring or a cable about to snap, call a professional door technician.
Maladjusted Garage Doors Settings
If you have a garage doors openers that is stuck closed, you may have a problem with the settings on your system. This is most common not long after a homeowner installs a new garage door. The problem is the factory settings don’t fit your particular garage door. If the settings are off, the system may assume your door is lighter than it actually is, or that it exceeds the built-in load weight fro the garage door opener, and literally will not respond to the prompts to open the garage. Usually, maladjusted settings require a service call.
Dead batteries are not the only reason your system stops working. While it’s possible you are just too far out if you have replaced your batteries and it still doesn’t work, Try it from a slightly different angle. Did it open? It’s very likely you may have tree branches that have overgrown over your garage and are blocking the signal.
Inspect the antenna to see there are no traces of dirt or smudges on it or visible damage. But if all that fails, you will likely need a service call.
Together with the springs and cables, the door track and rollers are what causes the system to really move that heavy garage door. If the tracks become bent there will often be either a slowing in the progress of the door as it moves or maybe even a loud squeak. The misalignment of door tracks can cause the entire system to groan and strain, and it doesn’t get better over time. Pick up that phone and call a technician.
Does your garage door close, or almost close and then reverse itself? This may be a simple matter of rugs, gum, paper or debris. You generally don’t need a service call unless you can’t find the obstruction. Garage doors openers.
Garage Doors Openers Has Been Disconnected
Sometimes it’s not the photo-eye, the remote, the receiver, or the antenna. Garage doors openers believe it or not, more often then you’d think, the motor becomes unplugged. Your opener system has a motor switch, which works in the event of a power outage. However, sometimes the chord get disconnected to the motor switch and the motor becomes disabled. If this is the case, plug it back in, and see if the system starts.
Garage Door Openers Stripped Gear
Garage doors openers last a long time, but not forever. And sooner or later, chances are, you will strip a gear and your opener will stop working. Signs of a stripped gear are a heavy humming sound, but nothing else is happening. And do yourself a favor, this time call a professional to do the job for you. Not only will they do it right, but it will be much less strain on yourself.
Many garage doors openers have a feature which allows a person to help protect against thieves, and in particular thieves with remote devices similar to yours. Instead, you need to hold down the remote button for several seconds. If you return from your vacation, and your door won’t unlock, try this out.
It happens more often than you think. Your garage door remote opener works perfectly fine, but for some reason or other (perhaps at the carwash, perhaps because your kids were playing in the car, you need to replace your garage door opener because your old one is lost. Or maybe it’s not lost, but for some reason, it became broken. Whatever the case, don’t panic. For less than $40 bucks (and sometimes a lot less) you can replace your garage door remote, program it, and be back in time to watch the first quarter of the big game.
The first thing to do is look on the side of your garage door remote opener for a name and model number. Then simply google it on the internet to find out if you can buy a replacement from the manufacturer. The bad news is that it may take a week or more to obtain a remote from the manufacturer, while Walmart and practically any auto parts store will sell you a universal garage door remote within 10 minutes.
To avoid thieves “hacking your garage, filled with valuables such as cars, bicycles and tools, consider investing money on a remote that offers you the capability of punching a pin in order to open the garage. These “pin remotes” are pretty well hackproof. They cost a bit more but are certainly worth the money for the extra security they provide. When it comes to garage door remote openers, technology can be a great friend. You can usually program a universal garage door remote within half and hour or less, but of course, if you buy a system from Star Solutions garage door Warminster, naturally we’ll program it for you.
This may come as some surprise to those stalwarts using 1990 garage door technology, but today it’s possible to get a garage door opener that synchs with your cellphone, to not only let people into your garage at your leisure but to be informed of if thieves entering and leaving your garage.
The best thing? You can get a wireless garage door remote opener that syncs with your smartphone for typically less than $75 if you install it yourself, or you can have Star Solutions garage door willow grove install one for you. If you have housekeepers, older children who only occasionally drop bye, receive packages or vacation a lot, the security of controlling access to your house through your smartphone is absolutely invaluable.
Wireless smart-phone controlled door are not only for homeowners either. If you own a business and have frequent truck deliveries, Star Solutions can hook you up with a wireless system and you can open and shut your warehouse door for the driver through your
Something that Star Solutions garage door repair sees with common frequency is a garage door that opens up and works properly but on the other hand, fails to close. Maybe it stops at the half-way point, or maybe the gap is only 6 inches to the floor. Regardless, you know that burglars can easily break-in by jamming the door open further with a crowbar. Chances are, you will need a call for garage door repair from a company such as Star Solutions, but there are things you can do.
First, assess for damage. If someone has already attempted to break into your garage or warehouse using a crowbar and brute force, it may be you’ll an entirely new garage door installed. However, assuming the garage door itself is okay, the first thing to do is to check the safety sensors.
These are the electronic eyes in your garage door near the track. There must be a clear line of sight between the two sensors, and if something is blocking them, that will stop the door from closing properly. Have a service company replace the rollers if that is the case. Garage door remote.
This is a safety measure that prevents the door from closing on a dog or a child. On rare occasions, your service company may need to adjust this safety switch to correct tolerances. And if you just can’t figure it out, call Star Solutions to get a trained technician to get a look at it.
Another common thing experts in garage door repair see is the garage door completely shuts and then promptly reverses course and starts to open again. Your first course may be to hire a voodoo priest or an exorcist rather than a garage door professional, but most often this is a problem with the close-force setting on your garage door unit. Basically, this setting determines the amount of force the garage door will hit the ground with, once closed, before shutting off the motor.
If the motor reverses course before hitting the ground, this is the likely problem. Garage door remote, On the other hand, if the door closes all the way and then reverses course, it likely means the close-limit switch setting is out of whack. In either case, call a pro such as Star Solutions, and rest easy.
It happens less than many of the other problems, but then Star Solutions Garage Door tech’s see just about everything: you garage door moves up and down, but then the motor won/t stop. One of the switches in your garage door opener (which are surprisingly sophisticated) is called an up-limit switch. If you experience this problem, have your Starlight Solutions technician make the proper adjustments so the motor doesn’t burn itself out.
This is a very common problem seen by Star Solutions garage door Glenside technicians. You Starlight Solutions technician can check your tracks, lubricate, and if necessary, replace damaged rollers.
Another common problem that Star Solutions Garage Door Jenkintown, PA technicians experience calls from people who once they shut their garage door, can’t open them back up in the winter. Most often, this is due to the cold weather making the rollers stiff, and the solution is to have a technician lubricate them.
Most often, lubrication of the rollers takes care of the problem, but sometimes the technician needs to adjust the screw in the motor of your garage door that determines your motors sensitivity. It’s a fairly simple task, providing you have the patience and dexterity to make the adjustment.
This is a very frequent question addressed by Star Solutions Technicians. And the first question to be asked, is if you are trying to activate the remote too far from the garage door motor? Secondly, have you changed the batteries? It would seem these two questions are common sense, but humans don’t always operate rationally. A frequent problem is a garage door opens totally by itself. Sometimes, this is because an object has lodged against the transmitter button, but more often than not, a neighbor is using the same frequency as yours to open his garage door.
Another reason why Star Solutions recommends that people get a garage door system that only opens once you’ve punched in a pin. It prevents thieves from hacking into your garage, and at the same time, it avoids accidental openings in the neighborhood.
If your garage door is noisy, screeching, or shuddering, don’t ignore it. It’s not going away by highing your head in the sand like an ostrich. You may have bad cables, worn springs, worn-out garage rollers, a damaged insulation stip, springs that need lubrication or more. At best, ignoring the situation may cause you to need a new garage door or a new garage door opener unit, at its worst, sometimes defective garage door units cause serious accidents. Get an expert to take a look at your garage door and your garage door opener at the first real signs of distress.
Believe it or not, garage door openers have an opening and closing speed, which is normally preset at the factory to the lowest setting. But, If the door is opening too slow, there’s a good chance the problem is in the broken springs, the tracks or the rollers. Lubricating the rollers or replacing damaged ones is frequently the solution, although not always. To be totally sure what the problem is, why not call a Star Solutions Garage Door technician to investigate?
If you have a garage that opens up to the very top, then springs down do a closing position, most often you have a problem with worn springs. Fixing garage door springs is not amateurs. It can be dangerous to even try. Chances are, you’ll injure yourself, or even worse, stand to injure a member of your family.
If your garage door closes too fast, don’t hesitate, call a technician immediately. Garage doors that snap down can injure your children and your pets. Most often the reason for the problem is a torn spring, a torn cable or both. A door will weigh hundreds of pounds, and if the cable or spring completely gives way, the damage to your family, children or pets could be catastrophic.
Don’t take a chance but call a trained Star Solutions Garage door Elkins Park technician to cand estimate the damage to repair your garage door, and then have it fixed properly.
Star Solutions Garage Door Services is a garage door company based in Jenkintown, Pennsylvania. The company specializes in garage door repair. The are voted best in their city. A garage door that give you problems is a garage door that gives you stress. There is no reason to be stressed because of a door, so Star Solutions is always there to help.
On Yelp, they have a four star review with many happy customers. The work they do is always spectacular and will leave you with happiness as you click open your functioning garage door as you drive up your drive after arriving from a long day at work. Jenkintown, Pennsylvania,
Their fully certified team not only serves the entire local area of Jenkintown, but also many other cities all around the great state of Pennsylvania.
Well unlike competitors, Star Solutions Garage Door Services focus on giving you the best functional garage door for your buck. The hard working employees always show passion in what they do. Star Solutions Garage Door Services offer the best products in town, from garage door openers to replacement jobs. They can replace pieces or the entire structure at a speedy pace. Being the best in garage doors allows them to supply customers with the best absolute door jobs around. If you have spring damage or the door itself needs replaced, Star Solutions has the best options and workers to get the job done.
First you need to know what you’re dealing with. The garage door is set up on tracks that run from the ceiling to the foot of the door way. In the middle of the ceiling in between these tracks is a hangar system that connects the door to a spring. This spring regulates movement by being pushed and pulled as it is opened and closed.
There is a chain and motor system on this that functions to activate the lift and lower process when you click your garage door opener. When something isn’t functioning properly, the best thing to do is to isolate each part and find out what isn’t functioning. You can do this by running a series of trials. Sometimes people leave items in front of the sensor causing the door to not close. The very first thing to do is make sure nothing is in front of your sensor.
There are multiple different kinds of springs that all function in their own way. Most garages use torsion springs, which are thick densely coiled springs that have extreme pressure allowing it to function strong and efficiently. These springs help maintain a push-pull motion that not only allows the garage door opener to function properly, but also allows you to open the garage door manually with ease.
If a spring breaks, you will most likely know. Due to the springs being extremely pressurized, a loud noise will occur when one breaks. If the break happens while you are at work, you can visibly examine the door and see that the spring is not in tacked. The first sign of a spring breakage is if the door is heavy when trying to manually open it.
Sometimes, due to the great force of the pressure that is released, the spring could not be connected to the door at all. Remember, if the door isn’t opening or is heavy, it could be another problem rather than the spring. The chains and other pieces of the garage door are just as important.
Repairing a broken spring can be very dangerous. You really don’t want to deal with it without special training. If the spring snaps out of pressure while your hand is up there it can cause some real damage.
Wondering when it is time to replace your garage door? Well whenever it isn’t protecting your possessions you store in there, obviously. A functional garage door will protect all your tools, equipment and vehicles stored inside. When its not succeeding in that it is time to replace the door.
The idea is to have access while keeping unwanted visitors out. If your door isn’t functioning properly it would be best to schedule an appointment to have it repaired.
Garage Door Services.
Sometimes, its not the door itself that needs replaced. On occasion it could be the door system that is the problem. Sometimes the wiring or electrical side could be damaged. This could cause the opener to not properly send the signal to the door to open. A damaged opener or wires could be frustrating. Having to replace these calls for a different kind of repair, that Star Solutions Garage Door Services is also certified in. They have people specializing in electrical work and clicker programming. The opener is basically a small computer and takes proper programming to function at tip top shape.
Keeping your garage operating properly is very important and can help have your door last for years. Proper maintenance can keep the chains, spring and door as good as new. The door is one of your houses biggest assets. At very minimum, on average, the door is used twice a day. So there is natural ware and tare on the door. There are many things you can do to keep your door functioning as good as an Olympic swimmer swimming casually in his backyard pool.
1. Always listen when using the door. This constant check will have you aware of how the door should sound. Knowing what it’s suppose to sound like will make an error in the operation very noticeable. Also, watch for strange movements or irregularities in the push-pull function of the spring.
2. It is always important to replace weather seals every now and then. These door seals protect your garage from any weather damage as well as keeping it air-tight allowing your garage to not take any damage from winds. These are easy to replace and can be down by yourself if wanted.